Communication cables
Telephone cable TPPepZBbShp (pair)
Application
Designed for operation in local primary communication networks and communication lines with a nominal voltage of remote power supply up to 145 V AC at a frequency of 50 Hz or voltage up to 200 V DC.
The cable can be used for installation in soils of all categories (except mechanized - in rocky soils) that are not subjected to permafrost deformations.
Cable design
1. Conductor: copper core.
2. Insulation: PE.
3. Core wrapping : synthetic tape.
4. Core filling - hydrophobic gel.
5. Copper tinned contact wire.
6. Inner shield material: aluminum foil.
7. Inner Sheath: UV stabilized PE.
8. Shield: steel foil.
9. Jacket: UV stabilized PE.
Design Versions
1. Armoring - corrugated laminated steel tape.
Standards
ТУ У 05758730.014-2000
МЭК 60708-1
МЭК 60189-1
ГОСТ Р 51311-99
BS 3573
Main technical and mechanical characteristics
| Operating temperature range, °C: от -50 °C до +50 °C | ||||||
| Installation temperature range, °C: от-10 °C до +50 °C | ||||||
| Bending radius of at least 10 cable diameters. | ||||||
| Minimum life service, years: 25 | ||||||
| Diameter of conductors, mm: | 0,32 | 0,40 | 0,50 | 0,64 | 0,70 | 0,90 |
| Conductor electrical resistance D.C, Ohm/km, no more than: | 216 | 139 | 90 | 55 | 45 | 27,4 |
| Capacity (0.8 to 1 kHz), nF/km: | 50±5 | 50±5 | 50±5 | 50±5 | 50±5 | 50±5 |
| Insulation electrical resistance, MOhm/km, not less than | 5000 | 5000 | 5000 | 5000 | 5000 | 5000 |