Floor heating cables
Heating cable 150 W/m with solid aluminum shield
Application
For room heating (by installing under the floor covering) in conditions of low mechanical stress (class M1). Operating temperature is no more than 65° С.
Supplied in the form of ready-to-use sections (mats), with a power 160 W/sq.m (220V). The heating cable is fixed to a fiberglass mesh with an adhesive layer with paper tape. Adhesive mesh layer is designed to be glued to a prepared surface. Has a protective plastic film to prevent premature adhesion. Sections have an attached power cable with hermetic connection class IPX7.
Cable design
1) Conductor: copper core
2) Insulation: PVC compound
3) Aluminum contact wires
4) Shield: aluminum foil
5)Sheath: PVC compound
Standards
ТIEC 800
Marking
HEATING CABLE ODESKABEL MAX 65 °C
Main technical and mechanical characteristics
| Conductor diameter, mm: | 4.5*5.5 |
| Estimated cable weight, kg/km: | 28.4 |
| Operating temperature range: | from -40° С to +50° С |
| Installation temperature range: | not lower than -5° С |
| Bending radius: | of at least 6 cable diameters |
| Tension resistance: | no more than 120 N |
| Deformation resistance, for cables of M1 class: | no more than 600 N |
| Shield electrical resistance: | no more than 34.5 Ohm |
| Insulation electrical resistance (60s/1000V): | not less than 1 MOhm |