Communication cables
Telephone cable TPPepZ (double paired)
Application
Designed for operation in local primary communication networks and communication lines with a nominal voltage of remote power supply up to 145 V AC at a frequency of 50 Hz or voltage up to 200 V DC.
The cable can be used for installation in telephone sewers, in sewers, mines, along the walls of buildings and suspension on overhead communication lines in cases of high humidity.
Cable design
1. Conductor: copper core.
2. Insulation: PE.
3. Core wrapping: synthetic tape.
4. Copper tinned contact wire.
5. Core filling: hydrophobic gel.
6. Shield material: aluminum foil.
7. Jacket: PVC.
Standards
ТУ У 05758730-040-2006
МЭК 60708-1
МЭК 60189-1
Main technical and mechanical characteristics
| Operating temperature range, °C: от -50 °C до +50 °C | |||||
| Installation temperature range, °C: от-10 °C до +50 °C | |||||
| Bending radius of at least 10 cable diameters | |||||
| Minimum life service, years: 25 | |||||
| Diameter of conductors, mm: | 0,40 | 0,50 | 0,60 | 0,80 | 0,90 |
| Conductor electrical resistance D.C, Ohm/km, no more than: | 148 | 96 | 65 | 36,6 | 28,4 |
| Capacity (0.8 to 1 kHz), nF/km: | 55 | 55 | 55 | 55 | 55 |
| Insulation elecrical resistance, MOhm/km, not less than | 5000 | 5000 | 5000 | 5000 | 5000 |
| Коэффициент емкостной связи k1, пересчитанный на 300 м длины, пФ, не более | 600 | 600 | 600 | 600 | 600 |
| Коэффициенты емкостной связи k9-k12, пересчитанные на 300 м длины, пФ, не более | 300 | 300 | 300 | 300 | 300 |