Cables for industrial network ProfiBus-DP
BUS 1 * 2 * 0.64V K-2
Application
Symmetrical twisted pair cables are designed for single stationary installation in industrial automation systems for technological processes and transmission networks in hazardous areas built in acc. PROFIBUS IEC 61158-2 and ISA / SP 50 (Foundation Fieldbus) specifications. Cables are used indoors and outdoors, provided that they are protected from direct exposure of sunlight and precipitation.
Cable design
1. Conductor: copper wire 0.64 mm
2. Insulation: FHDPE
3. Shield material: aluminum foil + tinned copper braid
4. Copper tinned contact wire
5. Sheath: PE
Installation and operation conditions
Temp Rating:
- Installation Temp Rating: -10 °C ... +50 °C;
- Operating Temp Range: -20 °C ... +60 °C.
Standards
PROFIBUS IEC 61158-2
Main technical and mechanical characteristics
| Electrical parameter at 20 ° C | Frequency, kHz | Value |
| Еest voltage for 1 min, kV - between cores and the screen: |
D.C. 0,05 |
0,7 0,5 1,4 1,0 |
| Pair electric capacitance, pF / m | from 0,8 to 1,0 | 35,0 |
| Impedance, ohm | 1000 | 150 ± 15 |
| Attenuation, no more than, dB / 100m | 1000 | 12 |
| Conductive core electrical resistance, Ohm / km, no more than | D.C. | 63,0 |
| Electrical insulation resistance, per 1 km of length and t. 20 С, MΩ, not less than | D.C. | 150 |
Nomenclature and mass-dimensional characteristics
| Cable brand | Outside diameter, mm | Weight, kg/km |
| BUS 1*2*0,64 V К-2 | 8,5 | 65,2 |